The two main types of controller available are IR and RF. One of the main advantages offered by the IR Controller is that it does not require direct line of sight in order to work. This means the control box can be concealed in ceiling spaces or behind walls, making the entire setup a little more discrete. The type you choose depends on the context and application of your strip lights. If you feel you are going to be restricted in terms of your controller placement or want a more inconspicuous setup, then an RF controller, despite its extra غير مجاز مي باشدt, will serve your purposes better.

IR stands for infrared and refers to the means of communication between the remote and control box..Due to their added functionality, RF controllers for LED Tape are generally more expensive, though not by much. Instead, you can operate the Tape so long as you are within proximity of the control box. In order to work a direct line of sight between the remote and control box needs to be 12mm PTFE Tape -12 maintained.

This allows you to synchronise more than one set of strips in order to create maximum effect. Instead of infrared radiation, the controller relies on radio wave frequencies.The controller typically consists of two units; the control box and remote. To get started the control box needs to be wired up between the transformer and LED Tape.RF stands for radio frequency. If you are using more than one set of LED Tape each will have to be controlled independently and you won't be able to synchronise them.

You will usually find that the red eye sensor is attached to length of wire, allowing you to position it for maximum effectiveness. Working together they allow you to manipulate the colour changing properties of your strip lights, offering various static and dynamic modes, with variable speeds and brightness's.Moreover, if you are using more than one set of LED tape you will be able to communicate with them all simultaneously off a single controller. The remote features an infra red LED, which communicates with a corresponding red eye sensor on the control box.