You will want to do this in one smooth motion, as it will make the end result look clean. Fiberglass is very slippery, and doesn't make a very good skate deck. The solution was grip tape.Grip tape most likely showed up on the scene during the late 1960s, with the dawn of the first mass-produced skateboard decks. Start by removing some of the grit on the edges by scraping the tape with a nail or other metal object.If you do come across bubbles in the grip tape, they're easy to remove. Originally, the manufacturers simply added a waffle pattern to the skateboards to combat the slipperiness.

There are many videos on youtube that can help a person apply grip tape to their board. Grip tape doesn't wear down as fast as sandpaper, though. Some skateboards are wider than others, and you don't want to apply grip tape that's not going to cover the entire deck. But don't forget your grip, and be sure to have a blast!Article Tags: Skateboard Grip Tape, Apply Grip Tape, Skateboard Grip, Grip Tape, Apply Grip . If you're looking for a text description of how to apply grip tape, continue reading. Work your hands over the top of Teflon Tape the tape to remove any bubbles in it as you stick the grip tape to the board.Once you've taken off the grit, remove the excess grip with a razor blade.Once you've installed the grip, you will need to remove the excess tape surrounding the deck.

Since you now know the history of grip tape, how to install grip tape, and why skateboarders need grip tape in this modern day and age, you should go out and skate. This just means that skateboard grip tape was already installed on the boards so that consumers didn't need to worry about applying the tape themselves. It's sort of difficult to ruin up a grip application; try to have fun with it. Grip tape is also quite sturdy and reliable. Just take a sharp knife, and cut a hole in the bubble. Sure, the wheels help you move, and the trucks keep the board off the asphalt, but what keeps you from falling off the board? Grip tape. This kind of worked, but the fiberglass was still too slippery. These massively produced skateboards often came pre gripped.Grip tape, as mentioned above, is one of the most important elements of a skate deck. A little bit of dirt or water is not enough to prevent the grip tape on a skateboard from working correctly.Once you've decided whether or not your grip tape is going to fit your board, you'll need to remove the backing. This should allow the air to escape from under the grip, letting you to flatten out the bubble. Removing the grit will make it much easier to remove the extra tape, giving you a clean

finish.Grip tape is basically just a piece of black sandpaper with a sticky backside that keeps it stuck to the skateboard.Grip tape is actually so sturdy, that even if it gets a little bit, it keeps its grip. Before applying grip tape, you will need to make sure you have enough. You should take some of the remaining grip and sand the edges if you are not happy with the result. Grip tape is also versatile enough to be painted on, without losing grip. Starting from one end of the deck, slowly lay down the grip tape.Grip tape can be applied with a little bit of hard work and some light.The very first skateboards were crafted from a slippery fiberglass material.Grip tape can be fairly tricky to apply to a deck